Free State Project Forum

Please login or register.

Login with username, password and session length
Pages: [1]   Go Down

Author Topic: Machine Operator, Keene NH  (Read 2698 times)


  • *
  • Offline Offline
  • Posts: 23
Machine Operator, Keene NH
« on: October 02, 2013, 12:39:00 pm »

Position: Machine Operator
Location: Keene, New Hampshire
Classification: Full Time
Hours: 11 AM to 7:30 PM M-F

I.                   PURPOSE AND SCOPE

The Machine Operator will provide basic labor and support to a variety of production operations as well as operate specialty machines as they are trained.


1.           Work in any production related area of the factory as assigned.
2.           Follow instructions of Production Line Leader, Room Leader, or supervisor.
3.           Perform all work as quickly and efficiently as possible.
4.           Ensure Lot Codes and dates codes are present and legible.
5.           Ensure machinery and equipment is in good working order. Communicate any problems immediately to Supervisor
6.           Ensure that all work and products meet quality and efficiency standards.
7.           Work in accordance with safety standards and expectations. 
8.           Comply with cGMP requirements and Standard Operating Procedures (SOP’s).
9.           Follow all work rules and company policies.
10.      Assist to keep work areas clean and organized.
11.      Properly completing production documentation as necessary
12.      Promote a positive work environment through professional and courteous interaction with co-workers.
13.      Actively participate with the team by providing constructive feedback or ideas to enhance safety and the general work environment; boost employee morale; improve operational efficiencies or outputs; improve product quality; or reduce costs, scrap, or waste.
14.      Additional activities as needed or assigned by Line Leader or Supervisor.


1.           High school degree, GED, or successful work history.
2.           Basic math and reading skills.
3.           Stand for prolonged periods of time.
4.           Ability to perform repetitive motions, primarily utilizing upper body extremities.
5.           Ability to work in a team environment and maintain high rates of repetitive manual activities.
6.           Ability to visually check for and verify printed lot and date codes in a fast paced environment.
7.           Good hand-eye coordination.
8.           Ability to perform repetitive lifting of up to 50 lbs.
9.           Must be able to work overtime hours as required.
10.      Must be able to work flexible schedule as is necessary.

Please e-mail letters of interest and resumes to the HR department.  Managers, please post this position in your department if applicable.

HR Manager – Jennifer Ogden –

Pages: [1]   Go Up