Free State Project Forum

Please login or register.

Login with username, password and session length
Pages: [1]   Go Down

Author Topic: 2nd Shift Sr. CNC Machinist - Portsmouth  (Read 1234 times)

Rich T.

  • FSP Participant
  • *****
  • Offline Offline
  • Posts: 713
  • Live Free in NH!
    • NH Liberty Alliance
2nd Shift Sr. CNC Machinist - Portsmouth
« on: June 27, 2012, 10:31:00 am »

Senior Machinist (2 positions) 2nd Shift (M-F, 2:30 pm - 11:00 pm) $17.00 - $23.00 per hour plus shift differential RESPONSIBILITIES

    Perform machining operations such as turning, milling, drilling, reaming, and tapping to very close tolerances on a wide variety of materials, on CNC machining centers, mills, grinders, and jig mills.
    Interpret complex engineering drawings and follow written and oral instructions. Make all required mathematical calculations without assistance.
    Use precision measuring instruments to insure that parts produced meet quality standards.
    Perform duties during machine cycle time such as inspect parts, maintain tooling, debur parts, stamp part numbers, or general housekeeping.
    Make difficult set-ups consisting of indicating, leveling, clamping, and blocking. Determine pick-up points, set stops, and controls, and check tooling. Solve complex daily technical problems with little assistance.
    Select correct cutting tools & Feeds & Speeds consistent with proper machining practices.
    Replace tooling and make machine adjustments to maintain product quality standards.
    Create and Edit N/C programs effectively as required.
    Train and provide guidance to lesser-experienced machinists in all aspects of their duties.
    Other duties may be assigned or required for the performance of this position. QUALIFICATIONS
    Use of advanced trade mathematics together with the use of complicated drawings, specifications, all varieties of precision measuring instruments, CNC equipment, multi-machine work stations.
    Equivalent to 1 to 3 years of applied training.
    Minimum of 5 years work experience. Company is adding a 2nd shift to our small machining group with the objective to reduce lead times for service part orders. We need very experienced machinists who can take a blue print and a piece of raw material (mostly low grade steel, some stainless, aluminum and brass also) and machine a part to very tight tolerances. Company is not looking for a machine operator. Good candidates typically have 10 or more year's experience, but we may consider someone with less experience (min. of 5 yrs.) with 2 year voc/tech school but has learning ability and drive. The work is low volume parts machining. So, they may be working on different parts every day. Individuals will originally train on first shift (6:00 am - 2:30 pm) for 6 - 8 weeks and then move to 2nd shift. Individuals need to have the knowledge and experience level to receive work orders at the beginning of shift and work independently during shift.

Seaside Associates
16 Pease Blvd
Newington, NH 03801
Phone: 603-766-3480
Fax: 603-766-3485

http://www.jobhost.org/jobs/viewjob/2nd-shift-sr-cnc-machinist-6f28d3f5eb078e94
Logged
Pages: [1]   Go Up
 

anything